Frequency Response Analyzer
Dynamic Solver (60Hz)
System Frequency Trace (H=5.5s)
MAX DEV FREQ
0.00 Hz
AGC INTEGRAL ADJUST
0.0 MW
Manual Grid Disturbances
Power Grid Feedback Loops:
Rotational Inertia (H): Immediate physical energy release matches load imbalance instantly: df/dt = ΔP / 2H.
Primary Droop Governor (R=4.5%): Adjusts valve positions proportionally in under 5 seconds to halt the frequency drop.
Secondary AGC Loop Integrator: Restores grid frequency exactly to 50.00 Hz over 15 to 30 seconds.
Interactive Topology Map
Click components to investigate/trip. Shift+Click to run N-1 Contingency.
Dynamic Legend
SCADA SYS
Normal Operating Load
Caution Corridor (>85% Load)
System Overload (>100% Load)
Tripped / Outage State
Buses: 12 nodes
Plants: 3 nodes
Asset Telemetry Inspector
SYS SECURE
No Asset Selected
Click any line, power plant, or substation on the central map diagram to inspect physical properties.
SUBSTATION
S3
LOGGED ONLINE
Element Failure Impact
Evaluating contingency factors...
PROPERTIES
No asset parameters loaded.
SECURE SCADA BUS - FEED ACTIVE
⚠️ Realtime N-1 Audit Terminal